Flooding Disable - H3C MSR 810 Command Reference Manual

Table 7 Command output
Field
Link ID
State
Type
Flood proxy
Split horizon
Statistics
Input statistics
Output statistics
Related commands
tunnel
vxlan

flooding disable

Use
flooding disable
Use
undo flooding disable
Syntax
flooding disable
undo flooding disable
Default
Flooding is enabled for a VSI.
Description
Tunnel's link ID in the VXLAN.
Tunnel state:
•
Up—The tunnel is operating correctly.
•
Blocked—The tunnel is a backup proxy tunnel. Its tunnel interface is up, but the
tunnel is blocked because the primary proxy tunnel is operating correctly.
•
Defect—The tunnel interface is up, but BFD cannot detect the remote VTEP.
This state is not supported in the current software version.
•
Down—The tunnel interface is down.
Tunnel assignment method:
•
Auto—The tunnel was automatically assigned to the VXLAN through EVPN.
•
Manual—The tunnel was manually assigned to the VXLAN.
Flood proxy state:
•
Enabled—Flood proxy is enabled. The VTEP sends broadcast, multicast, and
unknown unicast traffic to a flood proxy server through the tunnel. The flood
proxy server replicates and forwards flood traffic to remote VTEPs.
•
Disabled—Flood proxy is disabled.
State of split horizon:
•
Enabled—Split horizon is enabled on the VXLAN tunnel. The VXLAN tunnel
does not forward the traffic that is received on other VXLAN tunnels.
•
Disabled—Split horizon is disabled on the VXLAN tunnel. The VXLAN tunnel
forwards the traffic that is received on ACs and other VXLAN tunnels.
Packet statistics state:
•
Enabled—The packet statistics feature is enabled for the VXLAN tunnel.
•
Disabled—The packet statistics feature is disabled for the VXLAN tunnel.
Incoming traffic statistics:
•
Octets—Number of incoming bytes.
•
Packets—Number of incoming packets.
Outgoing traffic statistics:
•
Octets—Number of outgoing bytes.
•
Packets—Number of outgoing packets.
to disable flooding for a VSI.
to enable flooding for a VSI.
13