Encapsulation - H3C CR16000-F Command Reference Manual

Octets : 0
Packets: 0
Table 10 Command output
Field
Link ID
State
Type
Flood Proxy
Statistics
Input Statistics
Output Statistics
Related commands
tunnel
vxlan

encapsulation

Use encapsulation to configure a frame match criterion for an Ethernet service instance.
Use undo encapsulation to restore the default.
Syntax
encapsulation s-vid vlan-id
undo encapsulation
Default
An Ethernet service instance does not contain a frame match criterion.
Views
Ethernet service instance view
Description
Tunnel's link ID in the VXLAN.
Tunnel state:
•
Up—The tunnel is operating correctly.
•
Blocked—The tunnel is a backup proxy tunnel. Its tunnel interface is up, but the
tunnel is blocked because the primary proxy tunnel is operating correctly. This
state is not supported in the current software version.
•
Down—The tunnel interface is down.
Tunnel assignment method:
•
Auto—The tunnel was automatically assigned to the VXLAN:
EVPN automatically assigned the tunnel to the VXLAN.
For a multicast-mode VXLAN, the tunnel (MTunnel) was automatically
created and assigned to the VXLAN to transmit flood traffic.
•
Manual—The tunnel was manually assigned to the VXLAN.
Flood proxy state. This field is not supported in the current software version.
Packet statistics state:
•
Enabled—The packet statistics feature is enabled for the VXLAN tunnel.
•
Disabled—The packet statistics feature is disabled for the VXLAN tunnel.
Incoming traffic statistics:
•
Octets—Number of incoming bytes.
•
Packets—Number of incoming packets.
Outgoing traffic statistics:
•
Octets—Number of outgoing bytes.
•
Packets—Number of outgoing packets.
15