Motorola PowerQUICC II MPC8280 Series Reference Manual page 84

— Chapter 24, "SCC Transparent Mode," describes the MPC8280 implementation
of transparent mode (also called totally transparent mode), which provides a
clear channel on which the SCC can send or receive serial data without bit-level
manipulation.
— Chapter 25, "SCC Ethernet Mode," describes the MPC8280 implementation of
Ethernet protocol.
— Chapter 26, "SCC AppleTalk Mode," describes the MPC8280 implementation
of AppleTalk.
— Chapter 27, "Universal Serial Bus Controller," describes the MPC8280's USB
controller, including basic operation, the parameter RAM, and registers.
— Chapter 28, "Serial Management Controllers (SMCs)," describes two serial
management controllers, full-duplex ports that can be configured independently
to support one of three protocols—UART, transparent, or general-circuit
interface (GCI).
— Chapter 29, "Multi-Channel Controllers (MCCs)," describes the MPC8280's
multi-channel controller (MCC), which handles up to 128 serial, full-duplex data
channels.
— Chapter 30, "Fast Communications Controllers (FCCs)," describes the
MPC8280's fast communications controllers (FCCs), which are SCCs optimized
for synchronous high-rate protocols.
— Chapter 31, "ATM Controller and AAL0, AAL1, and AAL5," describes the
MPC8280 ATM controller, which provides the ATM and AAL layers of the ATM
protocol. The ATM controller performs segmentation and reassembly (SAR)
functions of AAL5, AAL1, and AAL0, and most of the common parts
convergence sublayer (CP-CS) of these protocols.
— Chapter 32, "ATM AAL1 Circuit Emulation Service," describes the
implementation of circuit emulation service (CES) using ATM adaptation layer
type 1 (AAL1) on the MPC8280.
— Chapter 33, "ATM AAL2," describes the functionality and data structures of
ATM adaptation layer type 2 (AAL2) CPS, CPS switching, and SSSAR.
— Chapter 34, "Inverse Multiplexing for ATM (IMA)," describes specifications for
the inverse multiplexing for ATM (IMA) microcode.
— Chapter 35, "ATM Transmission Convergence Layer," describes how the
MPC8280 can support applications that receive ATM traffic over the standard
serial protocols like E1, T1, and xDSL via its serial interface (SIx TDMx and
NMSI) ports because of its internally implemented TC-layer functionality.
— Chapter 36, "Fast Ethernet Controller," describes the MPC8280's
implementation of the Ethernet IEEE 802.3 protocol.
lxxxiv
Freescale Semiconductor, Inc.
MPC8280 PowerQUICC II Family Reference Manual
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA