Triggering - The Trigger Subsystem; Table 8 Triggering And Power Measurements - Agilent Technologies 8163A Programming Manual

Triggering - The TRIGger Subsystem

Table 8 Triggering and Power Measurements

Hardware Trigger Rearming
Triggering
trig:inp trig:inp:rearm
IGNore -
SMEasure ON
CMEasure ON
SMEasure OFF
CMEasure OFF
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition
Triggering - The TRIGger
Subsystem
The TRIGger Subsystem allows you to configure how the instrument
reacts to incoming or outgoing triggers.
Software Triggering
init:imm init:cont
One power mea- Automatically performs power
surement is per- measurements.
formed.
Every hardware trigger starts a new power measure-
ment.
The first hardware trigger starts a new power mea-
surement. Further hardware triggers are ignored until
you send trig:inp:rearm again.
Measurement Operations & Settings
Data Acquisition Functions
sens:func:stat
MINMax LOGGing|STABility
Automatically performs power
measurements until the func-
tion is finished.
Every hardware trigger starts a
new power measurement until
the function is finished.
The first hardware trigger starts
the function. Subsequent pow-
er measurements are automati-
cally performed until the
function is finished.
Every hardware trigger starts a
new power measurement until
the function is finished.
The first hardware trigger starts
the function. Subsequent pow-
er measurements are automati-
cally performed until the
function is finished.
171