Dlp-H149 Log Out A User On Multiple Nodes - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 17 DLPs H100 to H199
In node view, click the Provisioning > Security > Active Logins tabs.
Step 1
Choose the user you want to log out and click Logout.
Step 2
In the Logout User dialog box, check Lockout before Logout if you want to prevent the user from
Step 3
logging in after logout. User lockout parameters provisioned in the Policy tab determine when the user
can log back in. A user is locked out for the amount of time specified in the Lockout Duration field unless
a Superurser manually unlocks the lockout. See the
Node" task on page 17-44
Click OK.
Step 4
Step 5 Click Yes to confirm the logout.
Step 6 Return to your originating procedure (NTP).

DLP-H149 Log Out a User on Multiple Nodes

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
From the view menu, choose Go to Network View.
Step 1
Click the Provisioning > Security > Active Logins tabs.
Step 2
Choose the user you want to log out.
Step 3
Click Logout.
Step 4
In the Logout User dialog box, check the nodes where you want to log out the user.
Step 5
Check Lockout before Logout if you want to prevent the user from logging in after logout. User lockout
Step 6
parameters provisioned in the Policy tab determine when the user can log back in. A user is locked out
for the amount of time specified in the Lockout Duration field unless a Superurser manually unlocks the
lockout. See the
information.
Click OK.
Step 7
Click Yes to confirm the logout.
Step 8
Return to your originating procedure (NTP).
Step 9
78-19416-01
for more information.
This task logs out a user from multiple nodes.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Superuser only
"DLP-H141 Change the Security Policy on a Single Node" task on page 17-44
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
"DLP-H141 Change the Security Policy on a Single
for more
17-51