Dlp-B61 Create Login Node Groups - Cisco ONS 15327 Procedure Manual

Chapter 2 Connect the PC and Log into the GUI
•
Click Login.
Step 5
If login is successful, the CTC window appears. From here, you can navigate to other CTC views to
provision and manage the ONS 15327. If you need to perform the initial shelf turn-up, see
"Turn Up Node."
Return to your originating procedure (NTP).
Step 6

DLP-B61 Create Login Node Groups

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
From the Edit menu,
Step 1
Click Login Node Group and Create Group.
Step 2
Enter a name for the group in the Create Login Group Name dialog box. Click OK.
Step 3
Under Members, type the IP address (or node name) of a node you want to add to the group. Click Add.
Step 4
Repeat this step for each node you want to add to the group.
Click OK.
Step 5
The next time you log into an ONS 15327, the login node group will be available in the Additional Nodes
list of the Login dialog box. For example, in
the IP addresses for Nodes 1, 4, and 5. During login, if you select Test Group under Additional Nodes
and Disable Network Discovery is not selected, all nodes in the figure are displayed. If Test Group and
Disable Network Discovery are both selected, Nodes 1, 4, and 5 are displayed. You can create as many
login groups as you need. The groups are stored in the CTC preferences file on your local drive and are
not visible to other users on a different CTC PC or workstation.
March 2003
Disable Circuit Management—Check this box to disable discovery of existing circuits. Using this
option can decrease the CTC initialization time in networks with many existing circuits. This option
does not prevent the creation and management of new circuits.
If login problems occur, refer to the Cisco ONS 15327 Troubleshooting Guide.
This task creates a login node group to display ONS 15327s that have an IP
connection but not a DCC connection to the login node.
None
DLP-B60 Log into CTC, page 2-23
NTP-B21 Set Up Computer for CTC, page 2-1
NTP-B22 Set Up CTC Computer to Connect to the ONS 15327, page 2-8
As needed
Onsite or remote
Provisioning or higher
Preferences.
choose
Figure 2-3, a login node group, Test Group, is created and
Cisco ONS 15327 Procedure Guide, R4.0
NTP-B23 Log into the ONS 15327 GUI
Chapter 3,
2-25