Create New Users; Table 3-2 Ons 15327 User Idle Times - Cisco ONS 15327 User Documentation

Creating Users and Setting Security
Table 3-1 ONS 15327Security Levels—Node View (continued)
CTC Tab Subtab
Diagnostic
Timing
Audit
Routing Table Read only
Test Access
Each ONS 15327 user has a specified amount of time that he or she can leave the system idle before the
CTC window is locked. The lockouts prevent unauthorized users from making changes. Higher-level
users have shorter idle times, as shown in
Table 3-2
Security Level
Superuser
Provisioning
Maintenance
Retrieve
You can perform ONS 15327 user management tasks from network or node view. In network view, you
can add, edit, or delete users from multiple nodes at one time. If you perform user management tasks in
node view, you can only add, edit, or delete users from that node.
Note You must add the same user name and password to each node the user will access.
Procedure: Create New Users
In network view, select the Provisioning > Security tabs.
Step 1
On the Security pane, click Create.
Step 2
In the Create User dialog box, enter the following:
Step 3
•
•
•
•
Step 4 Under "Select applicable nodes," deselect any nodes where you do not want to add the user (all network
nodes are selected by default).
Step 5 Click OK.
Cisco ONS 15327 User Documentation, R3.3
3-6
Actions
Retrieve/Lamp test
Edit
Retrieve
Read only
ONS 15327 User Idle Times
Idle Time
15 minutes
30 minutes
60 minutes
Unlimited
Name—Type the user name.
Password—Type the user password. The password must be a minimum of six and a maximum of ten
alphabetic (a-z, A-Z), numeric, (0-9) and special characters (+, #,%), where at least one character is
alphabetic, one is numeric, and one is a special character.
Confirm Password—Type the password again to confirm it.
Security Level—Select the user's security level.
Retrieve Maintenance Provisioning
X
X
X X
Table 3-2.
Chapter 3 Node Setup
Superuser
X X
X X
X X
June 2002