Prepare To Install Cisco Ncs 1001; Review Safety Warnings; Unpack And Verify Cisco Ncs 1001 - Cisco NCS 1001 Hardware Installation Manual

Prepare to Install Cisco NCS 1001

This chapter explains how to prepare for the Cisco NCS 1001 installation.
•
•

Review Safety Warnings

Review the safety warnings available at Regulatory Compliance and Safety Information for Cisco NCS 1000
Series.

Unpack and Verify Cisco NCS 1001

Procedure
Step 1
When you receive Cisco NCS 1001 equipment at the installation site, open the top of the box. The Cisco
Systems logo is on the side of the box.
Step 2
Remove accessories and foam inserts from the box. The box contains Cisco NCS 1001 and other items needed
for installation.
Step 3 To remove the shelf, grasp the side of the shelf and lift the shelf out of the box.
Step 4
Verify that you have all items.
Table 4:
Item Number
502-00195-01
53-100688-01
800-46433-03
NCS1K SW OPT 2
NCS1K1 SW OPT
Review Safety Warnings, on page 15
Unpack and Verify Cisco NCS 1001, on page 15
2
C H A P T E R
Description
PKG, BAG, PE, A/S, FLAT, 24, 34, 2MIL
ACCESSORY KIT and SLIDE RAILS
ASY-TOP, CHASSIS
Software Options
Software Download - RTU not included
Hardware Installation Guide for Cisco NCS 1001
15