Show Ip Bgp Cluster-List - Dell C9000 Series Reference Manual

All the show and debugs commands display the link band width extended-community
prefixed with DMZ-Link-bw along with other extended communities.
Dell#show ip bgp 3.3.3.0/24
BGP routing table entry for 3.3.3.0/24
Paths: (1 available, table Default-IP-Routing-Table.)
Not advertised to any peer
Received from :
1.1.1.2 (3.3.3.1)
Extended Communities :
Related
show ip bgp community
Commands
neighbor maximum-prefix

show ip bgp cluster-list

View BGP neighbors in a specific cluster.
C9000 Series
Syntax
show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6
unicast] cluster-list [cluster-id]
Parameters
vrf vrf-name
ipv4 multicast
ipv4 unicast
ipv6 unicast
cluster-id
Command Modes
AS_PATH :
Next-Hop : 1.1.1.2, Cost : 0
Origin IGP, Metric
DMZ-Link Bw: 2000 kbytes*
— views the BGP communities.
(OPTIONAL) Enter the keyword vrf and then the name of the
VRF to view cluster information of BGP neighbors
corresponding to that VRF.
(OPTIONAL) Enter the keywords ipv4 followed by the keyword
multicast to view information related only to ipv4 multicast
routes.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword
unicast to view information related only to ipv4 multicast
routes.
(OPTIONAL) Enter the keyword ipv6 followed by the keyword
unicast to view information related to only to the ipv6 unicast
routes.
(OPTIONAL) Enter the cluster id in dotted decimal format. The
range is 1 — 4294967295.
• EXEC
• EXEC Privilege
Best
0, LocalPref 100, Weight
— controls the number of network prefixes received.
0, internal
Border Gateway Protocol 506