Show Redundant-Trunk-Group - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

show redundant-trunk-group

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 169: show redundant-trunk-group Output Fields
Field Name
Group Name
Interface
State
Last Time of Flap
# Flaps
show show
redundant-trunk-group redundant-trunk-group
group-name Group1 group-name Group1
1262
show redundant-trunk-group <group-name group-name>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display information about redundant trunk groups.
—Display information about the specified redundant trunk group.
group-name group-name
view
Example: Configuring Redundant Trunk Links for Faster Recovery on page 1101
Understanding Redundant Trunk Links on J-EX Series Switches on page 1049
show redundant-trunk-group group-name Group1 on page 1262
Table 169 on page 1262 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Field Description
Name of the redundant trunk port group.
Name of an interface belonging to the trunk port group.
denotes a primary interface.
(P)
denotes an active interface.
(A)
Lack of (A) denotes a blocking interface.
Operating state of the interface:
Date and time at which the advertised link became unavailable, and then, available again.
Total number of flaps since the last switch reboot.
user@switch> show redundant—trunk-group group-name Group1
show redundant-trunk-group group-name Group1
Group Name Interface
Group1 ge-0/0/45.0 (P)
ge-0/0/47.0
show redundant-trunk-group
or .
UP DOWN
State Last Time of Flap
UP Fri Jan 2 04:10:58
UP Fri Jan 2 04:10:58
command.
# Flaps
0
0