Setting A Wait Time For Connecting To A Network - Canon LBP251 User Manual

Setting a Wait Time for Connecting to a Network

When a network is designed to enjoy redundant connectivity with multiple switching hubs or bridges, it must have a
mechanism to prevent packets from looping. One effective solution is to define the role of each switch port. However,
communication may still be disrupted for several tens of seconds immediately after you change the way that network
devices are connected, or if you add a new device. If this type of problem occurs, set a wait time for connecting to the
network.
1
Press .
2
Use / to select <Network Settings>, and press
● If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press
Logging on to the Machine(P. 34)
3
Select <Waiting Time for Connection at Startup>, and press
4
Enter the wait time in seconds, select <Apply>, and press
● Use / or the numeric keys to enter the time.
LINKS
Configuring Ethernet Settings(P. 177)
Changing the Maximum Transmission Unit(P. 179)
Network
.
180
0W20-03K
.
.
.