Ip Router Primary-Address - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

IP Commands

ip router primary-address

Configures the router primary IP address. By default, the router primary address is derived from the first
IP interface that becomes operational on the router.
ip router primary-address ip_address
Syntax Definitions
ip_address
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
The router primary address should be a valid IP unicast host address.
•
The router primary IP address is used by BGP to derive its unique BGP Identifier, if the router
router-id is not a valid IP unicast address.
•
It is recommended that the primary address be explicitly configured on dual CMM chassis or stacked
routers.
Examples
-> ip router primary-address 172.22.2.115
Release History
Release 6.6.1; command was introduced.
Related Commands
ip router router-id
MIB Objects
alaDcrTmConfig
alaDrcTmIpRouterPrimaryAddress
OmniSwitch 6250 CLI Reference Guide
32-bit IP address.
Configures the router ID for the router.
November 2009 page 29-7