Forward-Delay - Dell C9000 Series Reference Manual

forward-delay

The amount of time the interface waits in the Blocking State and the Learning State before transitioning to the
Forwarding State.
C9000 Series
Syntax
forward-delay seconds
To return to the default setting, use the no forward-delay command.
Parameters
seconds
Defaults 15 seconds
Command Modes MULTIPLE SPANNING TREE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.5.1.0
Related
max-age
Commands
information.
hello-time
Enter the number of seconds the interface waits in the Blocking
State and the Learning State before transiting to the Forwarding
State. The range is from 4 to 30. The default is 15 seconds.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
— changes the wait time before MSTP refreshes protocol configuration
— changes the time interval between bridge protocol data units (BPDUs).
Multiple Spanning Tree Protocol (MSTP) 1423