lacp system-priority
lacp system-priority <priority_value>
Description
Configure the LACP system priority.
Syntax
Parameter
<priority_value>
Usage Guidelines
Set the LACP system priority.
Related Commands
Command
lacp group
show lacp
show lacp sys-id
show interface port-channel
Command History
Release
ArubaOS 3.4.1
Command Information
Platforms
All Platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Enter the system priority value. The higher the value number the lower the priority.
Range: 1 to 65535
Default: 32768
Description
Enable LACP and configure on the interface
View the LACP configuration status
View the LACP system ID information
View information on a specified port channel interface
Modification
Command introduced
Licensing
Base operating system
Command Mode
Configuration Mode (config) for Master and
Local controllers
lacp system-priority | 391