Measuring Length And Delay; Using The Power Meter - Agilent Technologies WireScope 350 User Manual

@‘ƒr…‡ÃH‚qrÃs‚…ÃAvir…ÃUr†‡vt
UurÃAvir…ÃU ‚‚y†ÃHrˆ

Measuring Length and Delay

Using the Power Meter

7−6
To use the Length & Delay tool:
1 On the Fiber Tools menu, press Length & Delay. The Fiber Length
Test screen displays. If a valid fiber connection is present, a Measure
button appears.
2 To begin the test, press Measure.
3 To select the test configuration, fiber type, or NVP, press Quick
Setup.
To use the Power Meter:
1 On the Fiber Tools menu. press Power Meter. You may be prompted
to calibrate upon entering this tool. This is not the same calibration as
the one used for testing. This calibration is just for the Fiber Power
Meter. After calibration the Fiber Power Meter displays.