Synthesizer Gain Adjustment; Local Output Power Adjustment; Source Output Power Adjustment - Agilent Technologies ENA Series Service Manual
Rf network analyzers
Hide thumbs
Also See for ENA Series:
- User manual (769 pages) ,
- Service manual (208 pages) ,
- User manual supplement (201 pages)
Table of Contents
Advertisement
Adjustment
Required Adjustment after Replacing Assembly
Required equipment for frequency reference adjustment
Description
Frequency Counter
BNC(m)-BNC(m) Cable, 122
cm
Synthesizer Gain Adjustment
The purpose of this procedure is to adjust the synthesizer gain of the source board.
Required equipment for the synthesizer gain adjustment
Description
None
Local Output Power Adjustment
The purpose of this procedure is to adjust the local output power of the source board.
Required equipment for the local output power adjustment
Description
None
Source Output Power Adjustment
The purpose of this procedure is to adjust the output level from the source board.
84
Recommended Model
Agilent 53131A Opt. 010
Agilent p/n 8120-1840
Recommended Model
None
Recommended Model
None
Chapter 3
Advertisement
Table of Contents
Troubleshooting
