Dell Force10 Z9000 Reference Manual page 1143

Example
FTOS#sh ip pim rp 229.1.2.1
(Address) Group
229.1.2.1
FTOS#
show ip pim tib
View the PIM tree information base (TIB).
C-Series, E-Series, S-Series, S4810
Syntax show ip pim tib [group-address [source-address]]
Parameters
group-address
source-address
Command Modes
Command History
Version 8.3.12.0
Version 8.1.1.0
Version 7.8.1.0
Usage The following describes the show ip pim tib command shown in the Example below.
Information
Field
(S, G)
uptime
expires
RP
flags
RP
165.87.20.4
(OPTIONAL) Enter the group address in dotted decimal format
(A.B.C.D).
(OPTIONAL) Enter the source address in dotted decimal format
(A.B.C.D).
• EXEC
• EXEC Privilege
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Description
Displays the entry in the multicast PIM database.
Displays the amount of time the entry has been in the PIM route
table.
Displays the amount of time until the entry expires and is removed
from the database.
Displays the IP address of the RP/source for this entry.
List the flags to define the entries:
•
•
•
D = PIM Dense Mode
S = PIM Sparse Mode
C = directly connected
1143