Dot1X Host-Mode - Dell C9000 Series Reference Manual

dot1x host-mode

Enable single-host or multi-host authentication.
C9000 Series
Syntax
dot1x host-mode {single-host | multi-host | multi-auth}
Parameters
single-host
multi-host
multi-auth
Defaults single-host
Command Modes
INTERFACE
INTERFACE (BATCH MODE)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.4.1.0
8.3.2.0
Usage Information
Enable single-host authentication.
Enable multi-host authentication.
Enable multi-supplicant authentication.
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Added the multi-auth option on the C-Series and S-Series.
Added the single-host and multi-host options on the C-
Series, E-Series, and S-Series.
• Single-host mode authenticates only one host per authenticator port and drops
all other traffic on the port.
• Multi-host mode authenticates the first host to respond to an Identity Request
and then permits all other traffic on the port.
802.1X 248