Show Ip Bgp Ipv6 Unicast Peer-Group - Dell Z9500 Reference Manual

show ip bgp ipv6 unicast peer-group

Allows you to view information on the BGP peers in a peer group.
Z9500
Syntax
show ip bgp ipv6 unicast peer-group [peer-group-name [summary]]
Parameters
peer-group-
name
detail
summary
Command
•
Modes
•
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Example
Dell#show ip bgp peer-group
Peer-group RR-CLIENT, remote AS 18508
Peer-group RR-CLIENT-PASSIV, remote AS 18508
Dell#
Border Gateway Protocol
(OPTIONAL) Enter the name of a peer group to view
information about that peer group only.
(OPTIONAL) Enter the keyword detail to view peer-group-
specific information for the IPv6 address family.
(OPTIONAL) Enter the keyword summary to view status
information of the peers in that peer group. The output is the
same as that found in show ip bgp summary command
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
BGP version 4
Minimum time between advertisement runs is 5 seconds
For address family: IPv4 Unicast
BGP neighbor is RR-CLIENT, peer-group internal,
Number of peers in this group 1
Peer-group members (* - outbound optimized):
9000::4:
BGP version 4
Minimum time between advertisement runs is 5 seconds
For address family: IPv4 Unicast
BGP neighbor is RR-CLIENT-PASSIV, peer-group internal,
Number of peers in this group 1
Peer-group members (* - outbound optimized):
9000::9:2*
547