Show Ip Bgp Peer-Group - Dell S6000 Reference Manual

Field
Address
Hash
Refcount
Community
Example
Dell#show ip bgp paths community
Total 2 communities
Refcount
1
1

show ip bgp peer-group

Allows you to view information on the BGP peers in a peer group.
S6000
Syntax
show ip bgp [vrf vrf-name] [ipv4 unicast] peer-group [peer-
group-name [detail | summary]]
Parameters
vrf vrf-name
ipv4 unicast
peer-group-
name
detail
summary
Command
•
Modes
•
Border Gateway Protocol
Description
Displays the internal address where the path attribute is
stored.
Displays the hash bucket where the path attribute is stored.
Displays the number of BGP routes using these
communities.
Displays the community attributes in this BGP path.
Community
NO-ADVERTISE
200:1
(OPTIONAL) Enter the keyword vrf to view information on
BGP peers in a peer group corresponding to that VRF.
(OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
(OPTIONAL) Enter the name of a peer group to view
information about that peer group only.
(OPTIONAL) Enter the keyword detail to view detailed
status information of the peers in that peer group.
(OPTIONAL) Enter the keyword summary to view status
information of the peers in that peer group. The output is the
same as that found in the show ip bgp summary
command.
EXEC
EXEC Privilege
1000:1 3000:1
NOTE: You can use this attribute to view information on
BGP peers in a peer group that correspond to either a
default or a non-default VRF.
423