Ip Bgp Neighbor In-Aspathlist - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

BGP Commands

ip bgp neighbor in-aspathlist

Assigns an inbound AS path list filter to a BGP peer.
ip bgp neighbor ip_address in-aspathlist {string | none}
Syntax Definitions
ip_address
string
none
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The AS path list name (InboundASpath in the example below) is created using the
aspath-list command. Any inbound routes from the BGP peer must match this AS path filter before
being accepted or passed to inbound policy.
•
To deassign an input AS path filter list, use this command to assign a value of none.
Examples
-> ip bgp neighbor 172.22.2.115 in-aspathlist InboundASpath
-> ip bgp neighbor 172.22.2.115 in-aspathlist none
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bgp policy aspath-list
MIB Objects
alaBgpPeerTable
alaBgpPeerAspathListIn
OmniSwitch CLI Reference Guide
32-bit IP address of the BGP peer.
Inbound AS path list (0 to 70 characters). This name is case sensitive.
Removes this AS path list from the peer.
Creates or removes an AS path list.
March 2011
ip bgp neighbor in-aspathlist
ip bgp policy
page 19-87