Table 4: Default Network Qos Policy(Type = Ip-Interface) Egress Marking - Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual

QoS Overview
•
•
Optional network QoS policy elements include:
•
•
•
Network policy ID 2 is reserved as the default network QoS policy of type IP interface. The
default policy cannot be deleted or changed.
Default network QoS policy 2 is applied to all IP interfaces which do not have another network
QoS policy explicitly assigned.
The network QoS policy applied at network egress (for example, on an IP interface) determines
how or if the profile state is marked in packets transmitted into the service core network. If the
profile state is marked in the service core packets, out-of-profile packets are preferentially dropped
over in-profile packets at congestion points in the core network. For network egress, traffic
remarking in the network QoS policy is disabled.
class to EXP values.

Table 4: Default Network QoS Policy(type = ip-interface) Egress Marking

FC-ID
7
6
5
4
3
2
1
0
Page 28
At least one default unicast forwarding class meter. The parameters that can be configured
for a meter are discussed in
At least one multipoint forwarding class meter.
Additional unicast meters up to a total of 11.
Additional multipoint meters up to 11.
EXP value to forwarding class and profile state mappings for all EXP values received.
FC Name FC Label
Network Con-
trol
High-1
Expedited
High-2
Low-1
Assured
Low-2
Best Effort
Meter Parameters on page
Table 5
Egress EXP
Marking
In-Profile
nc 111 - 7
h1 110 - 6
ef 101 - 5
h2 100 - 4
l1 011 - 3
af 011-3
l2 001 - 1
be 000 - 0
7210 SAS M OS Quality of Service Guide
40.
lists the default mapping of forwarding
Out-of-
Profile
111 - 7
110 - 6
101 - 5
100 - 4
010-2
010 - 2
001 - 1
000 - 0