ip bgp neighbor out-prefixlist
ip bgp neighbor out-prefixlist
Assigns an outbound prefix filter list to a BGP peer.
ip bgp neighbor ip_address out-prefixlist {string | none}
Syntax Definitions
ip_address
string
none
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The prefix list name (OutboundPrefix in the example below) is created using the
prefix-list
command. Any outbound routes from the BGP peer must match this prefix filter before
being advertised or passed to outbound policy.
•
To deassign an output prefix filter list, use this command to assign a value of "none".
Examples
-> ip bgp neighbor 172.22.2.115 out-prefixlist OutboundPrefix
-> ip bgp neighbor 172.22.2.115 out-prefixlist none
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bgp policy prefix-list
MIB Objects
alaBgpPeerTable
alaBgpPeerPrefixListOut
page 19-92
32-bit IP address of the BGP peer.
Output prefix filter list (0 - 70 characters).
Removes the prefix list from the peer.
Creates or deletes a prefix match list.
ip bgp policy
OmniSwitch CLI Reference Guide
BGP Commands
March 2011