Ip Bgp Neighbor Clear Soft - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

BGP Commands

ip bgp neighbor clear soft

Invokes an inbound or outbound policy reconfiguration for a BGP peer.
ip bgp neighbor ip_address clear soft {in | out}
Syntax Definitions
ip_address
in
out
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
This command reconfigures (or reapplies) all inbound or outbound policies to existing routes without
restarting the peer session.
•
This command is useful if policies have been changed.
Examples
-> ip bgp neighbor 172.22.2.115 clear soft in
-> ip bgp neighbor 172.22.2.115 clear soft out
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bgp neighbor soft-
reconfiguration
MIB Objects
alaBgpPeerTable
alaBgpPeerReconfigureInBound
alaBgpPeerReconfigureOutBound
OmniSwitch CLI Reference Guide
32-bit IP address for the BGP peer.
Applies reconfiguration to the inbound policies.
Applies reconfiguration to the outbound policies.
Enables or disables BGP peer soft reconfiguration.
March 2011
ip bgp neighbor clear soft
page 19-95