Ip Bgp Neighbor Out-Communitylist - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

BGP Commands

ip bgp neighbor out-communitylist

Assigns an outbound community filter list to a BGP peer.
ip bgp neighbor ip_address out-communitylist {string | none}
Syntax Definitions
ip_address
string
none
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The community filter list name (OutboundCommlist in the example below) is created using the
bgp policy community-list
community filter before being advertised or passed to outbound policy.
•
To deassign an output community filter list, use this command to assign a value of "none".
Examples
-> ip bgp neighbor 172.22.2.115 out-communitylist OutboundCommlist
-> ip bgp neighbor 172.22.2.115 out-communitylist none
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bgp policy community-list
MIB Objects
alaBgpPeerTable
alaBgpPeerCommunityListOut
OmniSwitch CLI Reference Guide
32-bit IP address of the BGP peer.
Outbound community list (0 - 70 characters).
Removes the community list from the peer.
command. Any outbound routes from the BGP peer must match this
Creates or deletes a community list.
March 2011
ip bgp neighbor out-communitylist
page 19-91
ip