Update Resident Lecs Address - 3Com CoreBuilder 7000 Management Manual

Update Resident LECS
Address
Updates the address of the resident LECS. You need to enter the user part
of the address (last 7 hex bytes). The switch network prefix is used for the
first 13 bytes. The update takes place immediately and is saved to flash.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
User part of LECS
address
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 1 2 0.a0.3e.0.0.1.0
The following message is displayed:
Flash action completed successfully
The resident LECS address is updated.
(2) LEM: LAN Emulation
(1) LCS: LE Config Service
(2) LSP: set resident LECS addr
Format or Range
7 Hex bytes separated with dots
2 1 2 [parameters]
The address of the resident LECS is updated. The
update takes place immediately.
Flash action completed successfully.
LECS Address 287