Update Port Interface Type - 3Com CoreBuilder 7000 Management Manual

Atm switches

Hide thumbs Also See for CoreBuilder 7000:

Table of Contents

Interface type:

---------------

<3.1> <3.2> <3.3> <3.4>

Current val:

Next reb val:

<4.1> <4.2> <4.3> <4.4> <4.5> <4.6> <4.7> <4.8>

Current val:

Next reb val:

<5.1> <5.2> <5.3> <5.4> <5.5> <5.6> <5.7> <5.8>

Current val:

Next reb val:

<6.1> <6.2> <6.3> <6.4> <6.5> <6.6> <6.7> <6.8>

Current val:

Next reb val:

Update Port Interface

Updates the ATM interface type for a specified port of the CoreBuilder

7000 family ATM switch. The possible interface types are PNNI, E-IISP, UNI

PNNI is available in version 4.5 extended only.

Manual Discovery

The main use of this command is during manual discovery, that is, when

auto-discovery is disabled. When auto-discovery is enabled,

("Enable/Disable Auto-Discovery" on page 133) the ATM interface type is

determined automatically by the auto-discovery protocol with the peer

ATM device. For more information about manual discovery, "Manual

Discovery" on page 47 in the Operations Guide.

Port Interface Type

Corebuilder 7000 series