Reset Elan - 3Com CoreBuilder 7000 Management Manual

C 11: C
354
HAPTER ONFIGURING

Reset ELAN

LAN E S
MULATION ERVERS
Disconnects the control distribute channel to all LECs attached to the
specified ELAN.
This feature enables the user to reset the LANE Services without
rebooting the CoreBuilder 7000 for the following purposes:
Shutdown of the redundant LANE Services to force all LECs to return
to the primary LANE Services after a failover has occurred.
Achieving a new LES configuration when updated (invoked by the
switch software automatically), for example, frame size change.
Troubleshooting, when there are problems with the connections of
LECs to the LES.
Resets general LAN Emulation statistics for a specified ELAN to zero.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
ELAN ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 2 5 2
The following prompt appears:
Are you sure (y/n): y
Enter to confirm,
Y N
(LES) C
AND LIENTS
(2) LEM: LAN Emulation
(2) LES: LE Services
(5) RST: LES Restart ELAN
Format or Range
1–16
See "Display ELAN Parameters in LES Database" on
page 322.
2 2 5 [parameters]
Specified ELAN is reset.
ELAN is reset
to cancel the reset request.