Add Lecs To Lecs-Order Database - 3Com CoreBuilder 7000 Management Manual

Index
----- -----------------------------------------------------------
0 47.00.00.00.00.00.3c.00.00.a0.00.00.00.00.a0.3e.00.00.01.00
1 47.00.00.00.00.00.3c.00.00.b0.00.00.00.00.a0.3e.00.00.01.00
Add LECS to
LECS-Order Database
LECS address
Adds a LECS to the LECS-order database as the last element. If you want
to change the order of the LECS in the LECS-order database you need to
delete the entries and re-enter them. You can add a LECS from any switch
in which the LECS has been enabled. Enter the ATM address of the LECS.
For more information about the LECS-order database, see "LECS
Redundancy Facility - Configuring the LECS-Order Database" on page
154 in the Operations Guide.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
LECS ATM Address
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 5 3 2
47.00.00.00.00.00.3c.00.00.a0.00.00.00.00.a0.3e.00.00.01.00
The following message is displayed:
Redundant LECS added.
The LECS is entered into the LECS-order database.
LAN Emulation Redundancy Setup
(1) SYS: Platform config
(1) SET: Switch setup
(5) SLE: LE setup
(3) LOL: LECS ordered list
(2) AOL: Add to LECS ordered list
Format or Range
ATM address
1 1 5 3 2
The LECS is added to the LECS-order database.
Redundant LECS added.
261