Update Lec Elan Join Privilege For Current Session - 3Com CoreBuilder 7000 Management Manual

Update LEC ELAN Join
Privilege for Current
Session
Updates the default ELAN join privilege for LECs which are not in the
ELAN security list for the current session. The default join privilege can be
Accept or Reject.
You need to save to flash to maintain this parameter after the next
reboot.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
ELAN ID
Join Privilege
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 3 1 2 1 1
The following message is displayed:
Default behavior changed successfully.
Parameters: 'ELAN id' - 12
The default ELAN join privilege for LECs which are not in the ELAN
security list is changed to Accept for the ELAN with ID 1.
LEC not in ELAN Security List
(2) LEM: LAN Emulation
(3) SEC: LE Security Configuration
(1) EDB: Elan default behavior
(2) SDF: Set elan default behavior
Format or Range
1–16
See "Display ELAN Parameters in LES Database" on
page 322.
1–Accept
2–Reject
2 3 1 2 [parameters]
The ELAN join privilege for LECs which are not in the
ELAN security list is changed for the current session.
Default behavior changed successfully.
Parameters: 'ELAN id' - 12
357