Display Interface Card Slot Occupancy - 3Com CoreBuilder 7000 Management Manual

C 5: C
104
HAPTER ONFIGURING
Display Interface
Card Slot
Occupancy
I M
NTERFACE ODULES
Displays the slot ID, slot status, and card type of each of the four interface
cards.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Direct access sequence:
Command Result
System action taken:
System message display:
Interface Card Slot Occupancy Parameters
Table 17 describes the interface card slot occupancy parameters displayed
by the command.
Table 17 Interface Card Slot Occupancy Parameters
Parameter
Slot ID
Slot status
Interface Card Type
Interface Card Status
Example
Enter:
1 5
Interface Card slot occupancy information is displayed as follows:
(5) IFC: Interface cards
1 5
Interface Module slot occupancy information is
displayed.
Table 17
See and the example below.
Description
Slot numbers.
Slot occupancy:
Occupied - Interface card installed in slot
Free - Slot empty
Type of interface card installed in slot
Interface card operating status
Up – Operational
Not exist – Slot empty
Fail – No communication with switch module