Reinitialize Interface - 3Com CoreBuilder 7000 Management Manual

Reinitialize
Interface
Reinitializes the interface card port. You are prompted to specify a port.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 5 1 3 3.2
The following message is displayed:
Re-initialize port <slot.port> completed successfully.
Port 2 in slot 3 of the selected interface card is re-initialized.
(5) IFC: Interface cards
(n) IFn; (n=1,4)
(3) INI: Reinit interface
Format or Range
slot.port
1 5 n 3 [parameters]
The selected port on the interface card is re-initialized.
Re-initialize port <slot.port>
completed successfully.

Reinitialize Interface

111