Logging Out; Activating And Storing A New Configuration Parameter - 3Com CoreBuilder 7000 Management Manual

Table 9 Editing Aids
To perform the task
Clear the value of the parameter last entered
Clear the values of all the parameters in the list just
entered
Delete the character preceding the insertion point
Delete the character following the insertion point
Toggle between Insert and Overwrite modes
Clear the command line
Escape from prompt (Fast Setup only)
To log out of the LMA, select (7) Logout of the Main Menu.

Logging Out

Automatic Logout
The CoreBuilder 7000 family ATM switch has an automatic logout feature
included on software versions from version 3.5. If you do not use the
keyboard for 15 minutes, the LMA automatically logs you out. You
cannot adjust the length of time or disable this feature.
Activating and When you update a configuration parameter through the LMA menus,
Storing a New the system performs two tasks:
Configuration
Parameter
The method and the timing of these tasks depends on the specific LMA
command, as described in the following sections.
Activating a New Parameter
The system can activate (begin to use) a new parameter in one of two
ways:
The method used by a specific LMA command is indicated in its
command description.
The parameter is activated by the system
The parameter is saved to flash memory
Immediately
Only after the next reboot
The LMA Menu System
Type
<
>
Backspace
Del
Ins
5
$
41