Get Atm Address - 3Com CoreBuilder 7000 Management Manual

Get ATM Address

The node level of node 1 is set to 80.
Displays the ATM address of the current PNNI node.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 10 4 3 3 2 1
The following message is displayed:
PNNI Node 1 of 1. PNNI Node ATM Address:
47.00.00.00.00.00.3C.00.00.03.00.00.00.00.C0.DA.60.1B.9F.FF
Configuring PNNI Nodes
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(3) CHR: Characteristics
(2) ADD: ATM Address
(1) GAD: Get ATM Address
1 1 10 4 3 3 2 1
The current PNNI node and its ATM address are
displayed.
PNNI Node <x> of <y>. PNNI Node ATM
Address: <address>
383