Display Atm-Layer Port Statistics - 3Com CoreBuilder 7000 Management Manual

Display ATM-Layer
Port Statistics
Displays the ATM layer statistics for a specified port. Provides information
on the capacity of traffic within ports.
Received cells with HEC error appear both on the ATM and the Physical
layer statistics, which use the same counter.
Unrecognized cells are those whose VPI/VCI values do not exist in the
translation table and are therefore not transferred through the ATM
processor.
Command Actions
Enter the menu sequence: (4) STS: Statistics
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
4 3 1 3.2
The ATM port statistics for port <3.2> are displayed.
Received total cells from port:
Transmitted total cells on port:
Received unrecognized cells on port:
Transmitted unrecognized cells on port:
Received cells with hec errors:
Received cells with correctable hec:
(3) ATM: ATM layer
(1) PRT: Stats per port
Format or Range
slot.port
4 3 1 [parameters]
ATM-layer statistics for the specified port are displayed.
Information is displayed as shown in the example
below.
ATM Statistics 239
1099518
877020
105
310
0
0