Add Elan Atm Address - 3Com CoreBuilder 7000 Management Manual

C 10: C
300
HAPTER ONFIGURING THE
Add ELAN ATM
Address
LAN E C
MULATION ONFIGURATION
Adds an ELAN ATM address for a specified ELAN debug mode ATM
address database. Note that this database is disconnected from the real
database.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
ELAN name
ATM Address
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 1 5 5 3
elan73_9 47.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
The system responds with the confirmation:
ATM address was added to this elan.
The ATM address for the selected ELAN is added to the debug mode of
the ATM address database.
S (LECS)
ERVICE
(2) LEM: LAN Emulation
(1) LCS: LE Configuration Services
(5) LNT: LECS Network topology
(5) ATM: ATM Address Info
(3) ADD: Add new ATM address
Format or Range
Up to 32 characters (see
290 in the Operations Guide
20 Hex bytes separated with dots or '*' for all
2 1 5 5 3 [parameters]
The ATM address for the selected ELAN is added to the
debug mode ATM address database.
ATM address was added to this elan.
"Display ELANs" on page
)