Port Interface Type; Display Port Interface Type - 3Com CoreBuilder 7000 Management Manual

Port Interface Type

Display Port Interface
Type
This action will change the external clock source
port.
Are you sure (Y/N)?
Enter: y
This message is displayed:
Setting clock synchronization completed
successfully.
The external clock source port is <3.1>
The synched external clock ports are:
<3.2>
<3.3>
<3.4>
<4.1>
<4.2>
<4.3>
<4.4>
<5.1>
<5.2>
<5.3>
<5.4>
<6.1>
<6.2>
<6.3>
<6.4>
The following commands allow you to configure the port interface type.

Display Port Interface Type

Update Port Interface Type
See Chapter 2 for more information about port interface types.
Displays the ATM interface type for each port of the CoreBuilder 7000
family ATM switch. The interface type is either the User-Network Interface
(UNI), or one of the Network-Network interfaces, E-IISP, IISP or PNNI.
When the port is connected to another CoreBuilder 7000 family ATM
switch the interface is E-IISP or PNNI. If it connected to an edge device
Port Interface Type 121