Display Peer Group Neighbor Information - 3Com CoreBuilder 7000 Management Manual

Level: 72 --------------------->
PGL Information:
PGL Leadership Priority = 0
PeerGroupLeader = 0000:00:000000000000000000000000.000000000000.00
Preferred PGL = 0000:00:000000000000000000000000.000000000000.00
Display Peer Group
Neighbor Information
The following information is displayed:
Displays information on the peer group neighbors of the Local Node.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Peer Group Neighbor Table Parameters
For a full description of all the parameters displayed in the peer group
neighbor table, see Table 61: PTSE Table Parameters - Peer Group
Neighbor Table Section.
Example
Enter:
1 1 10 4 7 7
Showing PNNI Information
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(7) SHO: Show PNNI information
(7) NBR: Neighbors
1 1 10 4 7 7
Peer Group Neighbor information is displayed.
Information is displayed as shown in the example.
459