Get Cache State - 3Com CoreBuilder 7000 Management Manual

C 13: C
440
HAPTER ONFIGURING AND

Get Cache State

M PNNI (F
ANAGING
Display the current DTL cache state. The DTL cache state may be
ENABLED or DISABLED. The default cache state is ENABLED.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 10 4 6 1
The following message is displayed:
PNNI Cache (for UBR) is ENABLED.
Press ENTER to continue....
E V O
OR THE XTENDED ERSION
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(6) SCR: Set Route Cache (UBR)
Configuration
(1) GCS: Get Cache State
1 1 10 4 6 1
The current DTL cache state is displayed.
PNNI Cache (for UBR) is
ENABLED/DISABLED.
Press ENTER to continue....
)
NLY