Display Current Subnet Mask Configuration - 3Com CoreBuilder 7000 Management Manual

C 4: C
76
HAPTER ONFIGURING AND
Display Current
Subnet Mask
Configuration
M S
ANAGING THE WITCH
Displays the current subnet mask configuration of the CoreBuilder 7000
family ATM switch. The subnet mask is used in conjunction with the IP
address.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 2 4 1
The following message is displayed:
Current Subnet Mask address: 255.255.255.0
M
ODULES
(1) SET: Switch setup
(2) MNG: Management setup
(4) MSK: Subnet Mask Setup
(1) GSM: Get Subnet Mask
1 1 2 4 1
The current subnet mask configuration is displayed.
Current Subnet Mask address: