Display Ports Enabled For Vp Tunneling - 3Com CoreBuilder 7000 Management Manual

C 7: C
224
HAPTER ONFIGURING
Display Ports Enabled
for VP Tunneling
V C
IRTUAL HANNELS
Displays the ports of the CoreBuilder 7000 family ATM switch which are
enabled for VP tunneling. For more information, see "VP Tunneling" on
page 5-101.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 9 2 1
The following information is displayed:
Tunnel ports:
<4.1>
<5.1>
(1) SET: Switch setup
(9) VPT: VP Tunneling Setup
(2) TPS: VP Tunneling Ports Setup
(1) GTP: VP Tunneling Get Ports
1 1 9 2 1
The ports of the CoreBuilder 7000 family ATM switch
which are enabled for VP tunneling are displayed.
Tunnel ports: