Disable Interface Port - 3Com CoreBuilder 7000 Management Manual

C 5: C
110
HAPTER ONFIGURING
Disable Interface
Port
I M
NTERFACE ODULES
Disables interface card port. You are prompted to specify a port.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 5 1 2 3.2
Port 2 in slot 3 of the selected interface card is disabled.
The following message is displayed:
Disable port completed successfully.
(5) IFC: Interface cards
(n) IFn; (n=1,4)
(2) DIF: Disable interface
Format or Range
slot.port
1 5 n 2 [parameters]
The selected port on the interface card is disabled.
Disable port <slot.port> completed
successfully.