Display Auto-Discovery Results - 3Com CoreBuilder 7000 Management Manual

C 6: ILMI C
142
HAPTER
Auto Configuration is active on this port
|Parameter Name
|================|================|================|=================
|ILMI Version
|UNI Version
|NNI Sig Ver
|Max Vpi Bits
|Max Vci Bits
|Max SVPC VPI
|Max SVCC VPI
|Min SVCC VCI
Display
Auto-Discovery
Results
ONFIGURATION
Display of Local Switch
Enter:
1 1 8 6 1 3.3
The auto-configuration results at port 3.3 of the local switch are
displayed as follows. They show that the local switch is configured to UNI
4.0 (local value) and the peer switch (remote value) is configured to UNI
3.1. The result of the auto-configuration is that the local switch is
reconfigured to UNI 3.1.
|Local Value |Remote Value
|ILMI 4.0 |ILMI 4.0
|4.0 |3.1
|PNNIV1.0 |EIISP
|3 |3
|9 |9
|0 |0
|7 |7
|32 |32
Displays results of the auto-discovery process for the specified port of the
CoreBuilder 7000 family ATM switch. The following parameters are
displayed.
Interface Type
IME Type
For more information, see "Auto-Configuration" on page 48 in the
Operations Guide.
|AutoCfg Result |
|ILMI 4.0 |
|3.1
|EIISP
|3
|9
|0
|7
|32
|
|
|
|
|
|
|