Update Read-Access Password - 3Com CoreBuilder 7000 Management Manual

C 3: G
44
HAPTER ENERAL
Update Read-Access
Password
T
ASKS
Updates the read-access password. Enter the new password a second
time to confirm your entry.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Enter a parameter at the prompt
Parameter
New password
New password again
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 1 1
The following dialog is displayed. Note that the passwords themselves are
not displayed.
Enter the new read password: mypassw
Enter the new read password again: mypassw
The password has been changed
The read-access password is updated.
(1) SET: Switch setup
(1) PAS: Password setup
(1) REA: Set Read-access Password
Format or Range
Up to eight alphanumeric characters
Same password
1 1 1 1 [parameters]
The read-access password is updated.
The password has been changed