Set Default Holding Time - 3Com CoreBuilder 7000 Management Manual

C 9: M
276
HAPTER ANAGING
Set Default Holding
Time
LAN E S
MULATION ERVICES
Sets the MPS-p7 default holding time parameter.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
default holding time
Direct access sequence:
Command Result
System action taken:
System message display:
Example:
Enter: 2 5 1 8 100
The following message is displayed:
Parameter changed successfully.
The default holding time parameter is set.
(2) LEM: LAN Emulation
(5) MPA: MPOA Devices Configuration
(1) MPS: MPOA Server Configuration
(8) MP7: Set default holding time
Format or Range
1 - 120 (minutes)
2 5 1 8 [parameters]
The default holding time parameter is set.
Parameter changed successfully