Set Keep-Alive Lifetime - 3Com CoreBuilder 7000 Management Manual

Set Keep-Alive Sets the MPS-p2 keep-alive lifetime parameter.
Lifetime
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Direct access sequence:
Command Result
System action taken:
System message display:
Example:
Enter: 2 5 1 3 900
The following message is displayed:
Parameter changed successfully. keep-alive lifetime should be
at least 3 times keep-alive time (220).
The keep-alive lifetime parameter is set.
Parameter
keep-alive lifetime
MPOA Devices Configuration
(2) LEM: LAN Emulation
(5) MPA: MPOA Devices Configuration
(1) MPS: MPOA Server Configuration
(3) MP2: Set keep-alive lifetime
Format or Range
3 - 1000 (seconds)
2 5 1 3 [parameters]
The keep-alive lifetime parameter is set.
Parameter changed successfully.
keep-alive lifetime should be at least
3 times keep-alive time (220).
271