Display Ilmi Channel Polling Status - 3Com CoreBuilder 7000 Management Manual

C 6: ILMI C
136
HAPTER
Display ILMI Channel
Polling Status
ONFIGURATION
Displays the ILMI channel polling facility status for the specified port of
the CoreBuilder 7000 family ATM switch. If enabled, the ILMI channel
VPI/VCI = (0/16) is periodically polled for connectivity. For more
information, "ILMI Connectivity Polling" on page 41 in the Operations
Guide.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 8 5 1 3.2
The following message is displayed:
ILMI polling is ENABLED.
(1) SET: Switch setup
(8) IME: ILMI setup
(5) POL: Polling setup
(1) GST: Get Polling status
Format or Range
slot.port
[parameters]
1 1 8 5 1
The ILMI Polling status for the specified port is
displayed.
ILMI polling is ENABLED/DISABLED.