Display Clock Synchronization Mode - 3Com CoreBuilder 7000 Management Manual

Display Clock
Synchronization
Mode
Board Name : 622_SM_SR_REV._C
Assembly No. : 503A0108-2C
Assembly Rev.: A6
Serial No. : sn722316134
Optic Vendor : HP
Optic Type : SDX1622
Serial Type : AMCC_3027Y_&_3028Y
Framer Type : PMC_SUNI622
Fifo 1 Size : 8_K_Byte
Fifo 2 Size : 32_K_Byte
Fifo 3 Size : 0.5_K_ByteSOLECTRON
Production site : SOLECTRON
Production date : DATE: 09-04-1997 TIME: 09:20:06
Displays the external clock synchronization mode of the external clock
source port.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 12 1
The following message is displayed:
Clock synchronization is disabled.

Display Clock Synchronization Mode

(1) SET: Switch setup
(12) SCS: Clock synchronization
setup
(1) DCS: Display clock
synchronization mode
1 1 12 1
The external clock synchronization mode of the port is
displayed.
Clock synchronization is
enabled/disabled.
119