Reset Atm-Layer Vci/Vpi Statistics - 3Com CoreBuilder 7000 Management Manual

Reset ATM-Layer
VCI/VPI Statistics
Resets counters for an individual and every VPI/VCI for a specified port.
Enter the port number, VPI, VCI and data direction. It is possible to reset
all counters of all VPI/VCI.
Command Actions
Enter the menu sequence: (4) STS: Statistics
Enter a parameter at the prompt
Parameter
Port ID
VPI
VCI
Data flow direction
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
4 9 2 3.1 0 188 B
The following message is displayed.
Reset VPI/VCI counters completed successfully.
The ATM-layer statistics are reset for port <3.1> and VPI/VCI = 0/188 for
both data flow directions.
(9) ATR: ATM layer-reset counters
(2) VCC: Reset counters per VPI/VCI
Format or Range
slot.port (0.0 for all ports)
(A- For all)
(Any value - For all VPIs)
I – Input
O – Output
B – Both
4 9 2 [parameters]
ATM-layer port statistics for the specified port and
VCI/VPI are reset.
Reset VPI/VCI counters completed
successfully.
ATM Statistics 243