Save Atm Addresses To Flash - 3Com CoreBuilder 7000 Management Manual

C 6: ILMI C
162
HAPTER
Save ATM Addresses
to Flash
ONFIGURATION
Saves the list of registered ATM addresses created by LMA to the flash
memory. Addresses registered at all ports in the CoreBuilder 7000 family
ATM switch are saved. Addresses registered by ILMI are not saved.
Command Actions
Enter the menu sequence: (3) CON: Connections
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
3 4 2 4
The following message is displayed.
Save completed successfully.
(4) S&C: Setup and Config Conns
(2) STP: Atm address setup
(4) SAV: Save addresses
3 4 2 4
All ATM addresses created by LMA are saved to flash.
Save completed successfully.